|
File form |
The best form |
Gerber |
|
Pcb file |
Protel 99SE. PADS , Altium Designer 6 Auto CAD |
|
'" |
Maximum size products |
500mm x 1500mm |
|
thickness |
The minimum thickness |
4L(0.4mm)6L(0.6mm)8L(1.0mm)10L(1.0mm) 12L(1.2mm) |
|
Maximum thickness |
5.5mm +/- 10% (0.165″ +/- 10% ) |
|
Biggest copper thick |
7OZ Line from 27mil above |
|
WanQiao plate |
< 7/1000 |
|
Plate material |
FR-4、gTGplank、Aluminum plate、Rogers、 Ptfe、No halogen |
|
Cutting board |
layer |
1-22L |
|
The thin lining slab thickness (do not contain copper thick) |
0.07mm (0.003″) |
|
Drill hole |
The minimum diameter |
0.1mm (0.004″)（Laser drilling） 0.15 mm (0.006″)Drilling machine |
|
Maximum diameter |
6.0mm |
|
Drilling migration |
+/- 0.002″ (0.050mm) 2mil |
|
PTH Aperture tolerance |
+/- 0.003″ (0.075mm) 3mil |
|
N-PTH Aperture tolerance |
+/- 0.002″ (0.050mm) 2mil |
|
KongHuan isolation |
+-/0.005″ (0.127mm) 5mil |
|
copper |
The small copper |
0.0008″ 8mil |
|
2OZ copper brass surface above hole |
0.001″1mil |
|
Freely than |
8 |
|
Corrosion carved |
The line width tolerance |
+/- 20% |
|
The minimum line width/spacing |
0.003″/ 0.003″ (0.75mm) 3/3mil |
|
The minimum line width/spacing(2oz) |
0.007″/ 0.007″ (0.18mm) 7/7mil |
|
The minimum line width/spacing(3oz) |
0.008″/ 0.008″(0.2mm)8/8mil |
|
The minimum line width/spacing(4oz) |
0.012″/ 0.012″ (0.3mm)12/12mil |
|
Inside layer |
Drilling to inner lines minimum distance |
0.007″(0.18mm) 7mil |
|
Minimum KongHuan segregation inside drill |
0.005″(0.3mm)5mil |
|
Interlayer matchups |
+/- 0.005″(0.127mm) 5mil |
|
Prevent weld |
color |
Green, shallow green, green, white mist, black, blue, yellow, red, transparent |
|
The minimum under the moisture |
0.003″3mil |
|
The minimum N - PTH hole under the moisture |
0.004″4mil |
|
Moisture thickness |
0.0004″- 0.001″0.4mil – 1mil |
|
text |
color |
White, black, red, yellow, blue, green |
|
MoXian under the minimum width |
0.005″5mil |
|
The minimum word high/word wide |
0.028″ / 0.028″28/28mil |
|
Electrical measurement |
inner |
AOI system |
|
finished |
Fly needle testing/special test |
|
Impedance control |
tolerance |
+/- 10% |
|
Use tools |
HP54750 |
|
Into type |
Molding reaming |
+/- 0.15mm (0.006″) 6mil |
|
CNC Molding tolerance |
+/- 0.15mm (0.006″) 6mil |
|
V-Cut Depth ( thickness > =1.0mm ) |
+/- 0.1mm (0.004″) 4mil
|
|
V-Cut Angle |
40° +/- 10° |
|
V-Cut Offset degrees |
+/- 0.1mm (0.004″) 4mil |
|
Surface treatment |
Ordinary not environmental protection |
H |
|
environmental |
Lead-free tin-leveled, gold, silver, tin, electric plating, carbon OSP, ink |
|
Auric goldfinger |
Electric plating fingers |
60u "normal maximum thickness of 3-5 u" |
|
Remember mark |
UL (Underwriters Laboratory) |
According to the customer's requirements |
|
Date Code |
According to the customer's requirements |
|
Its he |
Insulation resistance |
10‘Ω(normal)norm |
|
Hole resistance |
<300Ω(normal)norm |
|
Resistance to electric intensity |
>1.3kv/mm |
|
Resistance to current |
10A |
|
Resistance to peel strength |
1.4N/mm |
|
Resistance flux hardness |
>4H |
|
Thermal shock |
288℃20(秒)sec |
|
Hige test voltage |
50-300v |
|
Mark must |
IPC-600Acceptance standards |
Class II |
|
Product quality |
Quality authentication |
ISO9001 |
